Voltcon LED high mast lighting is very energy efficient and has a long service life. The LED technology continues to develop, and enables a more efficient, long lasting, and cost-worthy light source. The larger the area you want to light up, the higher your lights will need to be mounted on. If you need to illuminate large areas like airports, car parks or major roads, you'll need to use high mast lighting.
LED high mast lighting distribution
With LED high mast lighting, it's not just about how much light you get; it's about where it goes with traditional lights. Sources reflect as we used to put the light where IT was needed. Now With LEDs we can use lenses which give us even more precision to put the light just where IT's required and avoid light pollution.
With LED high mast lighting, you often have neighbors in an area surrounding that depot or the yard. So you also have to make sure that you have minimal tilt requirements. And that's usually achieved through optic lenses.
You may have cars, trucks, or even planes moving about beneath your lights. You don't want to serve them with glare. Similarly, if there are houses nearby, you don't want to disturb them either.
LED Lighting Color
Old fashioned sun or sox lamps gave an orangey glow which made it difficult to recognise color properly. Nowadays with HID and LED lights the lights white, which means you get much better color rendering
High Mast Pole and Lighting Maintenance
When you've got light mounted up this high, you really don't want to have to change a lamp if you can possibly avoid it. So make sure you choose a product that's going to last you a long time and make sure you quiz the manufacturer on how long its really going to last. Are you getting a warranty with the product and what does the lifetime of the product really mean if they say fifty thousand dollars? Is it going to die after fifty thousand hours? Or has it just lost some of its output? Ask these questions of the manufacturer and if you're not happy with the answers pick another manufacturer
You can save loads of energy by turning your lights off automatically or dimming them in response to time or movement all levels of light.
We think about with LED opens up a whole new world have been out a dim control LED and look at different ways of being more flexible within a working environment. Gone other days when it took ten or fifteen minutes for light slightly used to warm up and we no longer have the problem of warm restrict when you had to wait a long time after turning lights off before you could put them back on again with LEDs you can switch them on and off as often as you like.
Retrofitting new LED lights to existing columns is fairly straightforward these days, which makes upgrading to new technology that be easier. And with LED lights you can spread the weight of the loom and as on your columns more easily because you can direct the light more carefully in the direction you want it to go.
LED high mast lighting layout calculation
The following information is required to complete a high mast lighting layout calculation and determine what Bill of Material and other equipment is needed to complete a floodlighting installation according to the indicated requirements
Location of Project
This information is needed to analyze and define the applicable voltage and current feeds that will be present for the project along with organizing the lighting calculations
Used to validate the product models required for the project. Main input voltage supported is 120-277V at 50/60 Hz.
Drawing should show a clear definition of the areas that have to be illuminated (either shown on the drawing or provide dimensions of the area to light with a clear reference point or otherwise defining the aircraft stand.
This information will be used in the lighting calculations to determine equipment required and validate pole/mast height and locations Lux Level and Uniformity standards provide guidance on specific illumination requirements. If compliance with a standard is required. Use of the illuminated area affects the lighting calculations and material required. Aircraft stands require higher illumination standards then general operations areas. Indicate the use in the table.
High mast lighting Pole design
Retrofitting existing installations: Indicate on the provided drawings the exact position of the poles. Also required is the height of the existing poles and whether there position and heights are already defined or can they be changed. If it can be changed, define the new location and pole height options.
New installations: Indicate on the provided drawings the exact position of the new poles. Also required is the height and type of poles and whether there position and heights are already defined or can it be changed. If it can be changed, define the new location and pole height options.